Workcentre Giveaway

INDUSTRY APPLICATIONS

Safety, security and protection are just a few things that come standard with a Cogan partition system. Developed by Cogan over 50 years ago, our partitions have stood the test of time and continue the tradition of superior quality, functional design and structural integrity that has made us an industry leader.

Built for maximum durability, our partitions are on the job 24/7 creating practical work or storage space exactly where you need it. The all-steel construction resists wear and requires no maintenance, saving you valuable time and money. Whether you choose from our standard options or prefer a custom configuration for corner, three-sided or fully-enclosed installations, our experienced staff will make sure you get what’s best for you.


Posts Freestanding

 This partition system features freestanding posts up to 24’ high. Standard post spacing is 2’ to 10’ center-to-center. Custom post spacing is also available. Ideal for creating a secured perimeter in any manufacturing or warehouse facility. Panels are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with one or two welded 1/2” ø reinforcement rods.

This partition system features freestanding posts up to 24’ high. Standard post spacing is 2’ to 10’ center-to-center. Custom post spacing is also available. Ideal for creating a secured perimeter in any manufacturing or warehouse facility. Panels are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with one or two welded 1/2” ø reinforcement rods.

Posts Top Fix

 This partition system features floor-to-ceiling posts up to 48’ high. Standard post spacing is 2‘ to 10’ center-to-center. Custom post spacing is also available. Ideal for maximizing storage or workspace as the partition utilizes the full height of your facility. Panels are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with one or two welded ø 1/2” ø reinforcement rods.

This partition system features floor-to-ceiling posts up to 48’ high. Standard post spacing is 2‘ to 10’ center-to-center. Custom post spacing is also available. Ideal for maximizing storage or workspace as the partition utilizes the full height of your facility. Panels are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with one or two welded ø 1/2” ø reinforcement rods.

Posts Freestanding With Roof

 This partition system features freestanding posts up to 42’ high and includes framed roof panels for added security. Standard post spacing is 2‘ to 10’ center-to-center. Custom post spacing is also available. The perfect system when you need a high-level security partition in your plant or warehouse. Panels are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with one or two welded 1/2”ø reinforcement rods.

This partition system features freestanding posts up to 42’ high and includes framed roof panels for added security. Standard post spacing is 2‘ to 10’ center-to-center. Custom post spacing is also available. The perfect system when you need a high-level security partition in your plant or warehouse. Panels are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with one or two welded 1/2”ø reinforcement rods.

 

Panels

 Panels are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with one or two welded 1/2”ø reinforcement rods.

Panels are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with one or two welded 1/2”ø reinforcement rods.

roof

 Roof panels are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with one or two welded 1/2” ø reinforcement rods.

Roof panels are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with one or two welded 1/2” ø reinforcement rods.

Single Swing Gate

 All single swing gates are equipped with a padlock hasp, hinges and door stoppers. Gates can be hinged in for different orientations (opening inwards or ouwards / swing left or right). Additional lock options are also available. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2” ø reinforcement rods from center to the corner.

All single swing gates are equipped with a padlock hasp, hinges and door stoppers. Gates can be hinged in for different orientations (opening inwards or ouwards / swing left or right). Additional lock options are also available. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2” ø reinforcement rods from center to the corner.

 

Double Swing Gate

 All double swing gates are equipped with a padlock hasp, hinges and door stoppers. Gates can be installed in two different orientations (open inwards or outwards). Additional lock options are also available. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2”ø reinforcement rods from center to the corner.

All double swing gates are equipped with a padlock hasp, hinges and door stoppers. Gates can be installed in two different orientations (open inwards or outwards). Additional lock options are also available. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2”ø reinforcement rods from center to the corner.

Sliding Gate

 Sliding security gates allow you to have a door opening in constricted areas. With a wide selection of dimensions, sliding gates are ideal for heavy or large equipment and storage access. All sliding gates are equipped with a padlock hasp. Additional lock options are also available. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2”ø reinforcement rods.

Sliding security gates allow you to have a door opening in constricted areas. With a wide selection of dimensions, sliding gates are ideal for heavy or large equipment and storage access. All sliding gates are equipped with a padlock hasp. Additional lock options are also available. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2”ø reinforcement rods.

Double Sliding Gate

 Cogan bi-parting sliding gates are available in a similar range of convenient sizes as our sliding gates. Ideal for use in constricted areas. All bi-parting sliding gates are equipped with a padlock hasp. Additional lock options are also available. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2” ø reinforcement.

Cogan bi-parting sliding gates are available in a similar range of convenient sizes as our sliding gates. Ideal for use in constricted areas. All bi-parting sliding gates are equipped with a padlock hasp. Additional lock options are also available. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2” ø reinforcement.

 

Tunnel Gate

 When a wide opening and full height clearance are required for forklift access, nothing works better than a Cogan tunnel gate. All tunnel gates are equipped with a padlock hasp and heavy-duty 5” soft rolling casters. The top track guide allows for easy slide maneuverability, while the strong bolted steel handle offers a sturdy grip. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2” ø reinforcement rods.

When a wide opening and full height clearance are required for forklift access, nothing works better than a Cogan tunnel gate. All tunnel gates are equipped with a padlock hasp and heavy-duty 5” soft rolling casters. The top track guide allows for easy slide maneuverability, while the strong bolted steel handle offers a sturdy grip. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2” ø reinforcement rods.

Bi-Parting tunnel Gate

 When a wide opening and full height clearance are required for forklift access, nothing works better than a Cogan bi-parting tunnel gate. All bi-parting tunnel gates are equipped with a padlock hasp and heavy-duty 5” soft rolling casters. The top track guide allows for easy slide maneuverability, while the strong bolted steel handles offer a sturdy grip. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with one or two welded 1/2”ø reinforcement.

When a wide opening and full height clearance are required for forklift access, nothing works better than a Cogan bi-parting tunnel gate. All bi-parting tunnel gates are equipped with a padlock hasp and heavy-duty 5” soft rolling casters. The top track guide allows for easy slide maneuverability, while the strong bolted steel handles offer a sturdy grip. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with one or two welded 1/2”ø reinforcement.

Service Wicket Gate

 Cogan’s service wicket gate acts as a service counter. The top portion of the door swings open, while the bottom portion remains fixed to restrict free access to the partition. All service wicket gates are equipped with a padlock hasp, hinges and door stoppers. Additional lock options are also available.Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2” ø reinforcement rods from center to the corner.

Cogan’s service wicket gate acts as a service counter. The top portion of the door swings open, while the bottom portion remains fixed to restrict free access to the partition. All service wicket gates are equipped with a padlock hasp, hinges and door stoppers. Additional lock options are also available.Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2” ø reinforcement rods from center to the corner.

 

Dutch Gate

 Cogan's Dutch gate is designed to act as both a swing gate and a service counter. Open the top and bottom portions for full-access or open only the top portion to create a service wicket. Installs in two orientations. Padlock hasp and hinges as well as a spring latch are included. Additional lock options are also available. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2” ø reinforcement rods from center to the corner.

Cogan's Dutch gate is designed to act as both a swing gate and a service counter. Open the top and bottom portions for full-access or open only the top portion to create a service wicket. Installs in two orientations. Padlock hasp and hinges as well as a spring latch are included. Additional lock options are also available. Doors are made of 2” x 2” x 10 GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded 1/2” ø reinforcement rods from center to the corner.

 

+ Tool Cribs & Security Literature








Click on a thumbnail to expand the PDF document.


Contact us for more information

Name *
Name